Minggu, 25 Agustus 2024

For Fun Sake, I Installed macOS on Linux in a VM

For Fun Sake, I Installed macOS on Linux in a VM

Getting macOS to work on a non-Apple machine requires very selective hardware and countless hours configuring EFI, disks, and more. Using virtual machines can help overcome hardware nitpicking and focus on the experience.

If enough system resources are allocated for the VM, you might get a smooth experience out of macOS.

With the Quickemu project, virtualising macOS in Linux has never been easier. It uses Qemu/KVM under the hood to run virtual machines. MacOS versions from Mojave to Sonoma are supported.

Hardware Requirements

To virtualise macOS in your system, your system must satisfy the minimum configuration required:

  • Processor: Intel Core i5/AMD Ryzen 5 or above with 4 cores minimum (with virtualisation support)
  • RAM: 8 GB or more (macOS needs at least 4 gigs of memory)
  • Disk Space: at least 40 GB of free space
📋
Right from macOS Catalina, a fresh usable installation takes up 30+ GB of disk space and needs 8 GB of memory.

Quickemu installation

I am utilising the Quickemu project to install macOS. Based on qemu and KVM, it manages the downloading and execution of virtual machines within the command line.

You can find installation instructions on their GitHub repo. I am sharing the steps for Ubuntu, the distro I used in this tutorial.

Installing via PPA

The PPA method can be used for Ubuntu versions, including and above 22.04. Run the following commands in the terminal:

sudo apt-add-repository ppa:flexiondotorg/quickemu
sudo apt update
sudo apt install quickemu

Manual Installation from the repository

To install quickemu manually, obtain the dependencies (Debian-based distribution):

sudo apt install git qemu jq mesa-utils pciutils procps python3 genisoimage usbutils util-linux sed socat spice-client-gtk libtss2-tcti-swtpm0 xdg-user-dirs zsync unzip

You could get a specific version of the project from the releases page, or obtain the latest one by cloning the official repository:

git clone https://github.com/quickemu-project/quickemu/

Installing macOS

Within this project, a tool called quickget is used to download installation disc files from the official sources, which will be used to obtain a bootable configuration of macOS.

I am installing the BigSur version to demonstrate. Here are the steps:

Get the installation files via quickget

Change the directory to the repository, and run the following command:

cd quickemu

./quickget macos big-sur
For Fun Sake, I Installed macOS on Linux in a VM
Downloading macOS BigSur via Quickget

Launch the virtual machine

Now the virtual machine can be spun up, where the following will be the boot screen:

./quickemu --vm macos-big-sur.conf

Command to launch the virtual machine

For Fun Sake, I Installed macOS on Linux in a VM
First boot - EFI Screen

Select 'macOS Base system' to get into the installation medium.

📋
If the allocation of system resources has to be modified, check how to edit the quickemu config.

Create a partition from Disk Utility

The disk has to be partitioned in order to start with the installation. Hence, start with opening the Disk Utility from the menus:

For Fun Sake, I Installed macOS on Linux in a VM
Choosing disk utility from the recovery menu

Format the drive "VirtIO Block Media" by selecting and erasing it. Enter a preferred name for your filesystem (for which I conveniently chose "macOS" 😛)

For Fun Sake, I Installed macOS on Linux in a VM
Erasing the virtual hard disk

and choose the filesystem as APFS.

For Fun Sake, I Installed macOS on Linux in a VM
Enter a filesystem name and erase disk

Start the installer

Quit the disk utility and get to the second option: Reinstall macOS BigSur

For Fun Sake, I Installed macOS on Linux in a VM
Select "Reinstall macOS Big Sur"
For Fun Sake, I Installed macOS on Linux in a VM
Installation Welcome screen

Agree to the license terms and proceed further.

For Fun Sake, I Installed macOS on Linux in a VM
License Agreement page

After the license agreement, select the disk that you had already formatted. If you don't see the disk, quit the installer and check with the disk utility.

For Fun Sake, I Installed macOS on Linux in a VM
Selecting the disk for installation

And so the installation begins!

For Fun Sake, I Installed macOS on Linux in a VM
Progress of Installation

This page took around half an hour to complete (do not get confused by the ETA here). After a reboot, the installation continued for yet another half an hour:

For Fun Sake, I Installed macOS on Linux in a VM
Second installation progress screen

Once the installation is complete, you will be greeted with a welcome page. You can start configuring your system from there.

Setting up your macOS instance

The setup screen greets you after a successful installation. Here is what I followed throughout the setup, which you can follow too:

Choose the country

Selecting the country of residence when the VM boots up:

For Fun Sake, I Installed macOS on Linux in a VM
Select country

License agreement

Apart from the setup, the license has to be agreed to even in the setup.

For Fun Sake, I Installed macOS on Linux in a VM
License agreement

User account creation

Create a user account by specifying a username and password.

For Fun Sake, I Installed macOS on Linux in a VM

An Apple ID is required to use Apple services such as the store. Apple can suspend your ID for running macOS on non-recognised hardware, so beware.

For Fun Sake, I Installed macOS on Linux in a VM
Setting up an Apple ID

Timezone

Choose the appropriate timezone for the system by entering your nearest city of residence.

For Fun Sake, I Installed macOS on Linux in a VM
Choosing the timezone

Appearance

Here, choose either a constant light/dark mode or let the system choose for you:

For Fun Sake, I Installed macOS on Linux in a VM
Appearance - light/dark mode

And voila! You just successfully installed a fresh copy of macOS in your Linux system.

For Fun Sake, I Installed macOS on Linux in a VM
First boot of macOS

Tips for a seamless experience

Now that you have macOS installed in a VM, let me share a few tips and tweaks to enhance your experience.

Keyboard tweaks

If you are already used to macOS keyboard shortcuts, this is a tip to remap the command key near the spacebar:

Navigate to System Preferences ➡️ Keyboard ➡️ Modifier Keys, and swap the mapping of command and option keys.

For Fun Sake, I Installed macOS on Linux in a VM
Swap Option and Command Keys

This helps to emulate the macOS-like keybindings since the alt key now functions as the command key.

Editing the quickemu configuration

Quickemu supports a default conf file to accommodate configuration changes (the same file used for launching).

For instance, to change the amount of RAM allocated, add the following line to macos-big-sur.conf:

ram="4G"

Here's a demonstration of how the configuration is changed:

0:00
/0:38

Change memory of macOS VM

Quickemu supports more such tweaks. You may check their official documentation for more such tweaks.

Change display resolution

For macOS Catalina, the resolution set at boot will be taken as the default. It is done by passing width and height tags to the command. Here's a sample:

quickemu --vm macos-catalina.conf --width 1920 --height 1080

For BigSur and above, you need tools like SwitchResX (freemium application) to set a resolution manually.

Create a desktop shortcut

Creating the desktop shortcut might be the best option if you won't actively work in the terminal debugging the virtual machine. Here's the template that I used for the shortcut:

[Desktop Entry]
Name=macOS BigSur # change name according to the version
Exec=/home/username/quickemu/macos-big-sur.conf # change your config path
Type=Application
Terminal=false # to open only the VM window
Comment="Shortcut to run a macOS VM by Quickemu"
StartupNotify=true
Icon=

Save this as macos-big-sur.desktop in your desktop folder. Double-clicking it should automatically launch the VM.

0:00
/0:14

Desktop shortcut to launch virtual machine

Alternatively, you can create an application icon in your app drawer with the --shortcut tag, like:

./quickemu --vm ./macos-big-sur.conf --shortcut

Conclusion

After a journey with multiple tools to get an instance of macOS running, this method is comparatively easier since it provides an out-of-the-box experience without having to meddle with configurations.

The macOS installation itself takes almost an hour, which is another reminder of how blessed we are with Linux that gets installed in under ten minutes.

Why would you install macOS in your system as a virtual machine? Let me know in the comments below.



from It's FOSS https://ift.tt/8QekKl5
via IFTTT

Tidak ada komentar:

Posting Komentar